Due to the fact, that during the process microorganisms grow, the excess sludge has to be removed out of the system to held the microorganisms concentration nearly constant. Be able to calculate the required activated sludge recycle flow rate, waste. Thicken up the sludge by separating the liquid from the solid components. By increasing the contact time, biology can continue to further digest the organic components of sludge. The resulting settled solids, the activated sludge, are returned to the first tank to begin the process again. suitable aeration tank influent and aeration tank parameter information. The main objectives of sludge tanks are to: Increase digestion. Partially cleaned water flows on for further treatment if needed. In special cases also a flotation tank or membranes can be used to separate microorganisms. After a period of time, mixed liquor flows to a clarifier, which is in most cases a settling tank. This mixture is stirred and injected with large quantities of air, to provide the oxygen demand of microorganisms and keep solids in suspension. Wastewater supply is mixed with return of activates sludge containing a high proportion of organisms taken from the final sedimentation. These particles (flocks) in most cases are able to settle, so that they can separated with a simple settling process, which works according to the same principle as the pre-settling. The basic principle behind all activated sludge processes is that as microorganisms grow within metabolizing soluted organic material. The activated sludge process uses microorganisms to feed on organic contaminants in wastewater, producing a purified effluent.
0 kommentar(er)
